Tray Loading
Place the loaded tray on the feeder, then manually slide each row into the channel.
Precision Inspection · Confidence in Every ProductEnglish
Blister Feeder
Blister Feeding and Handling
Separate stacked blister cards and convey them individually using an adjustable release mechanism and guided belt. Use the blister feeder independently or connect it to packaging and inspection equipment.
Key Features
Individual Card Separation
Release blister cards one at a time onto the conveyor.
Adjustable Format Setup
Adjust hopper dimensions and release timing for the card format.
Four Conveyor Speeds
Select the belt speed to match downstream equipment.
Three Operating Modes
Independent, integrated online and sensor-controlled operation.
Coordinated Feeding
External controls and a hopper sensor coordinate start and stop.
Specifications
Technical
Parameters
Match blister flatness, stack alignment and setup to the product.
| Capacity | Up to 12,000 blisters/hour (200/minute) |
|---|---|
| Blister length | 85–130 mm |
| Blister width | 40–82 mm |
| Blister condition | Cards must be sufficiently flat for stable feeding |
| Belt speed — Gear 0 | 0.69 ft/s |
| Belt speed — Gear 1 | 1.38 ft/s |
| Belt speed — Gear 2 | 2.76 ft/s |
| Belt speed — Gear 3 | 4.13 ft/s |
| Operating modes | Independent; integrated online control; sensor-controlled feeding |
| Power | 1 kW |
| Power supply | 120/208 V AC, 60 Hz, 3-phase, 5-wire |
| Power source | Powered from the connected AIBIM blister inspection machine |
| Dimensions, L × W × H | 58.5 × 26.0 × 70.9 in |
| Total weight | 440 lb |
Blister Pack Feeding and Conveying
Separate and convey blister cards individually. Hopper dimensions, release timing and belt speed are adjusted to the blister format and downstream process.
Standalone Use and Production Connections
Use independent operation or coordinate with connected packaging or inspection equipment. Provide blister dimensions, required throughput and interface details.
Questions About Blister Feeding and Handling
Which blister formats can be handled?
Formats are selected using blister dimensions, hopper adjustment and release requirements.
How does the feeder connect to blister inspection equipment?
Match belt discharge, release timing and the operating mode to downstream equipment.
What format dimensions and throughput should I provide?
Provide blister dimensions, required throughput and installation details.
Can this equipment be used independently of a vision inspection machine?
Yes. Independent operation can be used for blister handling and conveying.