Enclosed Product Transfer
Move capsules through a food-grade hose.
Precision Inspection · Confidence in Every ProductEnglish
VCM-7500
Vacuum Feeding and Product Transfer
Transfer hard capsules through an enclosed hose using compressed-air-powered vacuum. Use the VCM-7500 for standalone capsule transfer or connect it to downstream production equipment, reducing open handling and repeated manual pouring.
Key Features
Compressed-Air Vacuum
Vacuum is generated using the compressed-air supply.
High Transfer Capacity
Up to 450,000 capsules/hour, depending on the product and setup.
Capsule Size Range
Supports #00E, #00 and #0 through #5.
Inline & Offline Installation
Use a support frame or mount above the inspection-machine hopper.
Product-Contact Materials
316L stainless steel, aluminum alloy and food-grade hose.
VCM-7500
Technical
Parameters
Transfer output depends on capsule size, fill weight and hose routing.
| Model | VCM-7500 |
|---|---|
| Capacity | Up to 450,000 capsules/hour |
| Capsule sizes | #00E, #00, #0, #1, #2, #3, #4 and #5 |
| Transfer distance / lift | 98.4 in |
| Vacuum generation | Compressed-air-powered vacuum |
| Product-contact materials | 316L stainless steel, aluminum alloy and food-grade hose |
| Power | 0.05 kW |
| Power supply | 24 V DC |
| Power source | Powered from the connected vision inspection machine |
| Air pressure | 0.6 MPa |
| Compressed air consumption | 330.2 gal/min |
| Dimensions, L × W × H | 31.5 × 31.5 × 99.3 in |
| Total weight | 100 lb |
Vacuum Conveying and Product Transfer
The current VCM-7500 configuration transfers hard capsules through a food-grade hose using compressed-air-generated vacuum. Transfer capacity depends on product and installation.
Standalone Use and Production Connections
Use the transfer unit independently or with downstream equipment. Confirm capsule size, hose route, utilities and product handling requirements before selecting the setup.
Questions About Vacuum Feeding and Product Transfer
Which materials and product forms can be transferred?
The current VCM-7500 configuration is documented for hard capsule transfer; other materials require a separate suitability assessment.
What connections and utilities are required?
Provide compressed air, a suitable hose route and the required mounting and equipment interfaces.
How should capacity and transfer distance be specified?
Specify the capsule, target transfer rate, hose route and receiving arrangement.
Can this equipment be used independently of a vision inspection machine?
Yes. The unit can serve standalone capsule transfer or connect to downstream production equipment.